Description
Morco 11 Litre EUP Room Sealed Water Heater – for Horizontal flues
The Morco EUP11RS is a room sealed, fan flued instantaneous gas water heater. This means its operation is independent of the room it is installed in, as the air for combustion is obtained from outside the home and the flue gases are expelled outside the home. It is therefore suitable for use in Leisure Accommodation Vehicles (LAVs) such as boats and caravan holiday homes. We do not recommend the use of this appliance in motorhomes. Ignition of the flame is electronic and will take place automatically when a hot tap is opened. The appliance does not store hot water.
The EUP11RS is the equivalent to the F11EL. It is EUP compliant with the same power output as the F11EL.
The flues and fitting kits for this new heater are different from those used on the F11EL. The EUP11RS can only be flued horizontally using the RSF503 flue. This cannot be adapted in the field to fit a vertical flue. The fitting kit required is the PKE.
A 45mm or 43mm flue restrictor ring is likely to be required for installation, dependent on total flue length.
A conversion document to make the replacement of an F11EL with an EUP11RS more straightforward is contained within the fitting/conversion kit. This can also be found in the user manual section below.
