Octagonal BrightStar™ – Built In Gas Burner

£565.00 – £610.00

BrightStar™ – Octagonal

The Octagonal burner measures 60 x 60cm.

  • Regulator Type - Select option depending on location of use

    • 0 £
    Reset options
Estimated delivery on 25 - 28 September, 2023
SKU N/A Category Brand:

Description

Octagonal Fire Pit Gas Burner

Designed to be built permanently into the landscaping of your garden, the BrightStar™ Gas Fire Pit Burners are manufactured from stainless steel and come complete ready to be installed into any brick type or concrete Firepit to match your garden taste and budget. Usually installed into an octagonal firepit.

  • Push-button piezo ignition system
  • Flame failure safety device
  • Variable gas valve
  • Lava Rock to cover the burner
  • 4mtr LPG hose and clips (LPG Model only)

The BrightStar™ burner produces flames in a star pattern, that concentrate the flames towards the centre, thus creating a very bright and natural-looking flame.

Additional information

Gas Type

LPG Propane Gas, Natural Mains Gas
Connection Type

Longer Connection, Standard Connection

Gas Type

Please, make sure you have carefully selected the correct Gas and Connection type for your needs.

What’s the difference?

  • Heat Output – The Mains gas and LPG gas burners provide the same amount of heat. (18kw).
  • Installation – Mains gas needs a pipe run back to the meter, bottled gas pipework can be a lot shorter.
  • Convenience – Mains gas, no bottles to replace during your event.
  • Running cost – Bottled gas is more expensive than mains gas. 
Bottle Propane LPG Gas

LPG Propane Gas

We recommend Propane LPG (Orange Bottle) Minimum bottle size 19kg. Bottled gas pipework can be a lot shorter.
Note: Our burners are configured for the specific gas, and are not interchangeable.

Natural Mains Gas

Natural Mains Gas

You will need an adequate gas supply, to cope with our 18kW burner. Mains gas needs a pipe run back to the meter.
Note: Our burners are configured for the specific gas, and are not interchangeable.

Connection Type

Please, make sure you have carefully selected the correct Gas and Connection type for your needs.

brightstar-hose-drawing

Standard or Longer?

Standard: Dimension A = 575mm
This is the length of the pipework connecting the burner to its control box. Although these connections are flexible, meaning the control box can be positioned easily in different sized pits, there is a maximum limit.

For all standard BrightStar burners, the distance from the centre of the burner, to the front face of the control box (Dimension A) measures 575mm This is ideal for firepits up to 1.2mtrs outside dimension. (Assuming the control box is recessed back into the brickwork slightly)

Longer: Dimension A = 1.2mtrs
We also offer much longer connections if required. This enables the control box to be positioeds further away from the burner. With these connections, ( Dimension A ) measures 1.2mtrs

Installation Manual

LPG – https://brightstarfires.co.uk/wp-content/uploads/2021/05/Manual-Brightstar-LPG.pdf

Mains Gas – https://brightstarfires.co.uk/wp-content/uploads/2021/05/Manual-Brightstar-NG.pdf

Related products

Brands we Stock

We pick the very best so you can be assured of the quality. So you can shop with confidence. Browse by brand below.
Previous
Next

Subscribe to our Newsletter

Sign up to our newsletter for exclusive offers & news.

Octagonal BrightStar™ – Built In Gas Burner
£565.00 – £610.00