Gas Burner LPG Installation Kit for 20mm MDPE

£76.00

This can be used for Brightstar Fires Built in Burner LPG (Propane) Installations, with a pipe run up to 45mtrs maximum.

Estimated delivery on 3 - 4 October, 2023

Description

This can be used for LPG (Propane) Installations with a pipe run up to 45mtrs maximum.  (If greater than 45mtrs, you will need to use 25mm MDPE kit)

This kit has all the fittings needed when using 20mm MDPE gas pipe (pipe not supplied).

Kit Includes:

  • 20mm MDPE Compression female adaptor for the burner end.
  • 20mm MDPE Compression male adaptor for the supply end.
  • 600mm flexible stainless steel hose and union adaptor, to connect the end of your MDPE pipe to the burner.
  • Brass socket to connect the flexible stainless steel hose onto the burner inlet. (located under the control box).

Note:  With all our LPG burners, we supply a nozzle attachment, (which screws onto the MDPE Male Adaptor)  4mtrs of LPG hose, and 2 stainless pipe clips with each burner.   These are used to connect to your bottle regulator.  Suggest you cut the hose to the required length as needed.

Additional information

Weight0.9 kg

Installation Manual

https://brightstarfires.co.uk/wp-content/uploads/2023/01/MDPE-Installation-Guide.pdf

Brands we Stock

We pick the very best so you can be assured of the quality. So you can shop with confidence. Browse by brand below.

Installation Kit for 20mm MDPE
Gas Burner LPG Installation Kit for 20mm MDPE
£76.00